Send pictures to sales@robertbrooke.com

Now stocking the Von Duprin 880/990 trim hex shafts or studs

We are now stocking the Von Duprin 880/990 trim hex studs.  The hex studs are the pieces that thread into the outside handle and go through the door so the exit device can be screwed on to the door.  The

Tagged with: , ,
Posted in Exit Devices

We are now stocking the Von Duprin 050148 Lever Shear Pin

We are now stocking the Von Duprin Lever Trim 050148 Shear Pin.  This is the piece that locks the Lever Trim in place and connects it to the operating shaft.  This pin is designed to break when a certain amount

Tagged with: , , ,
Posted in Exit Devices

The Dor-o-matic 1090 is the same as the Dor-o-matic 2090

If you have the  Dor-o-matic 1090, you can use the Dor-o-matic 2090 as a replacement.  The Dor-o-Matic 1090 is a model that was discontinued in 1995 or so and was the up scale version of the 2090.  The 1090 was

Tagged with: ,
Posted in Exit Devices

Dor-o-matic 990 Panic Device has been replaced by the 1990

The Dor-o-matic 990 Panic Device has been replaced by the 1990 Dor-o-matic Panic Device.  About 15 years ago, when Ingersoll Rand purchased Dor-o-matic they discontinued the 990.  They used to have the Dor-o-matic 990 and the 1990, were the 990

Tagged with: ,
Posted in Exit Devices

Doromatic Exit key cylinder not working – whats the cause

Do you have a Doromatic Exit and key cylinder that is not working?  Chances are the Doromatic Pinion Gear (Cam) PB5 is missing a tooth or two.  The gear is made of a die cast material, that tends to fail

Tagged with: , , , , , , , ,
Posted in Exit Devices

Doromatic 16/17/2390 Dogging Kit shaft only now available

We are now stocking the Hex Shaft only for the Doromatic  1690/1790/2390 dogging kit assembly.  This is the replacement shaft for the Doromatic KIT.1197 Dogging Kit.  So now instead of spending $24.00 for the kit, you can purchase the dogging

Tagged with: , , , , , , , , , , , , , ,
Posted in Exit Devices

Yale 2000 series dogging can be update from plastic to metal

If you have any older Yale 2000 series exit device, with the plastic dogging assembly, this post is for you.   You can change out your older plastic dogging assembly with the newer metal dogging assembly.  The Dogging Assembly is sometimes

Tagged with: , , , ,
Posted in Exit Devices

Von Duprin 9927 or 9827 bottom rod or latch dragging on the floor

If your Von Duprin 9927 or 9827 bottom latch is dragging or scraping on the floor the most likely problem is the Top Latch.   On the Von Duprin 9927 or 9827, the  Top Latch Case does all the work.  When

Tagged with: , , , , , , , ,
Posted in Exit Devices

Von Duprin 8827 bottom latch dragging or scrapping on floor

If your Von Duprin 8827 bottom latch is dragging or scraping on the floor the most likely problem is the Top Latch.   On the Von Duprin 8827 050460, the  Top Latch Case does all the work.  When you press down

Tagged with: , , , ,
Posted in Exit Devices

Jackson Exit Device 1085, 1285 or 2086 bottom rod dragging

Is your Jackson Exit Device 1085, 1285 or 2086 bottom rod dragging on the floor?  If so the problem is really easy to fix.  99% of the time the problem is the Top Bolt Guide Assembly .   The tell

Tagged with: , , , , , , , , , ,
Posted in Exit Devices