Comments on: Replacement Russwin 2800, 2810 and 2820 Door Closer

By: Robert Brooke

Robert Brooke — Wed, 15 Mar 2017 12:07:32 +0000

In reply to Favron Pierre. The number SL72, is telling me you have either the old Corbin 100 series or Russwin 2800. The newer Corbin Russwin DC6210 will work in its place, same mounting holes and everything: https://www.rbadoor.com/corbin-russwin-door-closer-dc6210.html Greg

By: Favron Pierre

Favron Pierre — Tue, 14 Mar 2017 15:24:25 +0000

We would like to replace a Ckarksdale hydraulic door closer installed
since long time, model MISS SL72.

Does it exist same model or equivalence model.
thank’s to reply

By: jeff Brown

jeff Brown — Mon, 14 Mar 2016 14:02:51 +0000

I have an old Clarkdale-Corbin door closer that is not allowing the door to fully close. You can push it shut and it remains closed, but when opened again it stays open about 6″. I can send you picture of the door closer if you send me an e-mail.

By: rbaadmin

rbaadmin — Mon, 09 Dec 2013 14:12:01 +0000

In reply to Dan. Dan, To replace the MS 92 Clarksdale ms door closer you would use the DC3210 or the DC6210 depending on the installation. If you have an interior door I would use the DC3210, shown on this page, https://www.rbadoor.com/corbin-russwin-door-closer-dc3210.html . If the door is an exterior door I would use the DC6210, which is shown on this page, https://www.rbadoor.com/corbin-russwin-door-closer-dc6210.html . Both of these door closer will have the same hole spacing as the MS 93 Clarksdale MS door closer. Greg 1-800-642-2403

By: Dan

Dan — Fri, 06 Dec 2013 16:39:09 +0000

how do i replace the clarksdale ms 92, hoping to use same holes

By: Nathan Loman

Nathan Loman — Thu, 31 Oct 2013 21:10:49 +0000

In reply to rbaadmin. Thanks a lot Gregg. I appreciate the quick feedback. Nate

By: rbaadmin

rbaadmin — Thu, 24 Oct 2013 13:03:14 +0000

In reply to Nathan Loman. Nathan, The DC3210 and the DC6210 have the same hole spacings as the Clarksdale Miss SL72 Door Closer. They mount on the quick adapter plate the same way. If you have an interior door I would recommend the DC3210. If you have an exterior door I would recommend the DC6210. With either of these door closers, you will not have to re-drill holes. These door closer can be found on our website under Corbin Russwin Door Closers. Greg 1-800-642-2403

By: Nathan Loman

Nathan Loman — Tue, 22 Oct 2013 23:08:50 +0000

Do you know if they still make Clarksdale miss sl72 door closers. If not what would be a replacement for it and not have to drill holes. Thanks Nate