Comments on: Dor-o-matic 990 Panic Device has been replaced by the 1990

By: LARRY LEIDY

LARRY LEIDY — Thu, 18 Apr 2019 20:26:04 +0000

THANKS GREG For the phone help on the pinion 990
series. Thank You Larry

By: Robert Brooke

Robert Brooke — Mon, 19 Jun 2017 13:26:57 +0000

Andrew,
I just emailed the installation instructions and pinion position diagram for the Doromatic Falcon 1990. They should be the same as the 990.
Greg

By: Andrew Albanese

Andrew Albanese — Sun, 18 Jun 2017 15:48:35 +0000

I re-keyed a lock cylinder on Glass Door with 990 concealed Rod vertical door. The door locks and unlocks but does not hold the bars in retracted (unlocked) position for normal use. The office manager says a certain key position would click and leave the door unlocked. I tried adjusting the pinion cam to several diffent positions, but didn’t get it to work. There are Allen Head screws that I thought would be for dogging the door open. I turned them all the way in and no affect. Can you help me with advice? Could you e-mail me the installation instructions.

By: Robert Brooke

Robert Brooke — Fri, 12 May 2017 13:24:19 +0000

In reply to Robert Bitz.

Robert,
I am emailing the 990/1990 installation instructions through my Robert Brooke Email.
Greg

By: Robert Bitz

Robert Bitz — Thu, 11 May 2017 22:12:53 +0000

Need install instructions for the 990 model

By: Robert Brooke

Robert Brooke — Mon, 27 Mar 2017 18:14:22 +0000

In reply to Mike. The Doromatic Falcon 990/1990 can not be converted to Electric Latch Retraction. But what you can do is switch over to the 1690, or the EL1690, which uses the same concealed rods. The EL1690 can be found on our website @ Doromatic Falcon EL1690 Greg

By: Robert Brooke

Robert Brooke — Mon, 27 Mar 2017 18:05:29 +0000

In reply to Brad Weston.

Brad,
I will email you the installation instructions, that will hopefully help. It has to do with the position of the Cam on the Retractor, the instructions will clear it up.
Greg
1-800-642-2403

By: Brad Weston

Brad Weston — Mon, 27 Mar 2017 15:55:37 +0000

I have a church that unlocks the doors with a key. HB mode I assume. Seems like the key does not turn far enough to remove. In other words the retractor seems to bottom out before allowing the key to turn far enough to remove and hold the rods in unlocked position. They do not want to use the dogging method. dor a matic 1990 series any suggestions

By: Mike

Mike — Wed, 22 Mar 2017 20:26:48 +0000

Can I convert the Series 990 to an electric powered panic for use with access controls?

By: Robert Brooke

Robert Brooke — Sat, 17 Dec 2016 20:19:22 +0000

In reply to Steve Coble.

Steve,
I just emailed the Dor-o-Matic Falcon 1990 installation instructions to you. If you need any parts you can find them at https://www.rbadoor.com/panic-devices/parts/1990-2090/-/manufacturers/dor-o-matic.html , and just to let you know we do ship to schools automatically open account.
Greg
1-800-642-2403